KXTG2382, KXTG2383 & KXTGA230 FAQs

  1. What do I do when "NO LINK TO BASE" is displayed on any of the handset's LCD display?

  2. How do I delete the handset from the base memory?

  3. I have a new handset, and want to make it the #1 unit on my phone. How can I do this?


1. What do I do when "NO LINK TO BASE" is displayed on any of the handset's LCD display?
First, you can try moving closer to the base (with the handset) and try again.

If that doesn’t resolve the problem, try resetting the Base and affected Handset first by following the steps below:

  1. Remove the power AC adapter from wall outlet or base of phone.
  2. Immediately reconnect the AC adapter.
  3. Remove the battery from the handset and immediately replace it in the handset.
  4. Place the handset back into the base charger for about 5 seconds.
  5. Test
Note: The handset charge will be at 1 bar on the battery icon in the display. This is normal. Recharge handset.

2. How do I delete the handset from the base memory?
1. Press and HOLD the ALL button on the base until the charge light flashes slowly. (About 4-6 seconds).
2. Then Press and HOLD the Intercom button (either 1, 2 or 3) until the charge light flashes rapidly. (About 4-6 seconds).
3. Now, re-register the new handset to the base according to the instructions below.

  1. Press the MUTE/FUNCTION button
  2. Scroll or to the arrow in the display shows "Initial set", and press the
  3. Scroll or to "HS register" by pressing or and press the
  4. Press the at "Registration"

    From the Base
  5. Press and hold the HANDSET LOCATOR/INTERCOM ALL button until the Charge indicator flashes. (About 5 seconds)

    From the Handset
  6. a. Press
    b. Wait about 20 seconds until a long beep sounds and the display shows the registered number.
This completes the registration.

3. I have a new handset, and want to make it the #1 unit on my phone. How can I do this?
1. Press and HOLD the ALL button on the base until the charge light flashes slowly. (About 4-6 seconds).
2. Then Press and HOLD the Intercom button (either 1, 2 or 3) until the charge light flashes rapidly. (About 4-6 seconds).
3. Now, re-register the new handset to the base according to the instructions below.

  1. Press the MUTE/FUNCTION button
  2. Scroll or to the arrow in the display shows "Initial set", and press the
  3. Scroll or to "HS register" by pressing or and press the
  4. Press the at "Registration"

    From the Base
  5. Press and hold the HANDSET LOCATOR/INTERCOM ALL button until the Charge indicator flashes. (About 5 seconds)

    From the Handset
  6. a. Press
    b. Wait about 20 seconds until a long beep sounds and the display shows the registered number.
This completes the registration.



 

Go To Panasonic Home Page Go To Panasonic Home Page consumer electronics business & professional solutions industrial solutions ClubPanasonic rebates and promotions product registration customer support search consumer electronics business & professional solutions industrial solutions ClubPanasonic rebates and promotions product registration customer support search consumer electronics business & professional solutions industrial solutions ClubPanasonic rebates and promotions product registration how to buy customer support customer service viewcart search consumer electronics business & professional solutions industrial solutions ClubPanasonic rebates and promotions product registration customer support search